Visas GIGALINK preces

PoE splitter, 100 Mbps, 802.3af

PoE injector, 1 Gbps, 802.3af

power supply for injectors GL-PE-INJ-AF-F and GL-PE-INJ-AT-F, 12 V, 2 A

additional external charging module 1000W (240V/4.1A) for UPS GIGALINK models GL-UPS-OL06-1-1 and GL-UPS-OL10-3-1

USB module for UPS series OL06/10 internal connection, expansion card allows you to connect to the UPS via USB to monitor the status of the device

bypass on IEC C19*2 + IEC C13*6 allows you to transfer the load from the UPS to the mains without turning off the equipment

additional external charging module 250W (72V/3.1A) for UPS GL-UPS-OL03-1-1

UPS management and monitoring system module via internal SNMP protocol, RJ-45 port, LAN interface: 10/100Mbps UTP, network protocols and standards: TCP/IP, HTTP, HTTPS, SSL, SSH, SMTP, SNTP, DHCP, Telnet, BOOTP, DNS, DDNS, PPPOE

the external unit is designed to connect the output of "dry contacts" to the RS-232 port of the UPS to monitor the status of the uninterruptible power supply

relay card for connecting the output of "dry contacts" to the UPS to monitor the status of the uninterruptible power supply

bypass for parallel connection of 4 UPS 6/10kVA (Max 200A)

horizontal rails for mounting the UPS GL-UPS-OL06-1/1 and GL-UPS-OL10-3/1 in a 19" cabinet/rack

connecting cable, ringed for Anderson connectors on one side and M8 ring on the other, section 6mm2, 5 m

control and monitoring system module via SNMP protocol for internal connection with environmental sensor (temperature/humidity/flooding)

rails for 19" rack for UPS and GIGALINK battery packs, variable depth: from 520 to 930 mm, see compatibility below

rails for 19" rack for UPS and GIGALINK battery packs, variable depth: from 320 to 530 mm, see compatibility below

uninterruptible power supply 20000VA/18000W, without batteries, 3/1 three-phase

uninterruptible power supply 6000VA/6000W without batteries, 1/1 single-phase

1-port USB to RS-232 converter